How to Flash Android Stock Firmware (Official Rom) Using YGDP Tool

These are the instructions on how to flash CPB firmware using YGDP Tool on Android.

Requirements: Your Android should have atleast 20-30 percent of battery to perform the Flashing Process.

Step 1: Download and install the Android USB Drivers on your Computer. If Android Drivers is already installed on your computer then Skip this Step.

Step 2: Download and install YGDP Tool on your computer.

 

Step 3: Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Step 4: Once YGDP Flashing Tool is launched, you will be able to see the following screen:

Step 5: Now, enter the Password 369 or 9527 and click on Login button.

Step 6: Once you are able to see the main screen of YGDP Tool, then click on the Configbutton.

Step 7: And add the CPB firmware (locate the CPB firmware that you want to flash on your Android):

Step 8: Now, Click on the Apply button.

Step 9: Now, connect your Android to the computer (make sure it is power off and battery installed).

Step 10: Now, click on the Start Button to begin the flashing.

 

Step 11: Once Flashing is completed you will be able to see green Upgrade Successfulmessage.

Congratulations, Now your Android is successfully running the Stock Rom you have Downloaded.

https://youtu.be/ YGDPTool

Readme Once:

[*] Take Backup: Take a Phone backup before using the YGDP Flashing Tool as because during the flashing process your personal data will be removed.

[*] Always press volume up key from the device and connect to the computer then start the flashing process.

[*] Compatibility issue: If YGDP Tool doesnt work in Windows 7, Windows 8 or Windows 10, in that situation right click on the YGDP_Assembly.exe > Properties > Run this Program in compatibility mode for Windows XP.

[*] Credits: YGDP tool is created by Coolpad Inc, so full credits goes to them for the tool.