How to Flash Android Stock Firmware (Official Rom) Using eMMC DL Tool

0

How to Flash Android Stock Firmware (Official Rom) Using eMMC DL Tool

These are the instructions on how to use eMMC DL Tool to flash stock firmware on Android Device.

Requirements: Your Android device should have at least 20-30 percent of battery to perform the Flashing Process.

Download Android Stock Firmware (Official Rom)

 

The firmware shared on this page is officially released by the company and helps you to recover your Android device if you ever got bootloop, software error, update error, hanging and dead issue.

How to Flash Android Stock Firmware (Official Rom) Using eMMC DL Tool

1: Download and extract eMMC Download Tool and Drivers. After Extracting you will be able to see the following files:

eMMC DL Tool

2: Install the USB Drivers .

eMMC DL Tool

3: Power Off your Android Device.

eMMC DL Tool

4: Download the Stock Rom that you want to Flash on your Android Device and extract it on your Computer.

Step 5: Now, Open eMMC Download Tool (you have extracted this in Step#1) on Your Computer.

eMMC DL Tool

6: Once eMMC DL Tool is launched, Click on […] Button and locate the firmware folder.

eMMC DL Tool

eMMC DL Tool

7: Once You have successfully added the firmware folder in the eMMC DL Tool, proceed to the next Step.

eMMC DL Tool

8: Now, Connect your Android Device to the Computer (make sure it is power off and Press the Volume UP and Down together, connect the phone to the computer at the same time).

9: Once you have successfully added the Android Device to the computer then Right Clickon Computer > Manage > Device Manager.

10: In Device Manager, Under the Ports Section, you will be able to see the Port Number of your Android Device (Note the Port Number).

eMMC DL Tool

eMMC DL Tool

eMMC DL Tool

 

11: Now, In eMMC DL Tool you can setup the Port Number.

eMMC DL Tool

12: Now, To Begin the Flashing Click on the DL1 Button.

eMMC DL Tool

13: Now, eMMC DL Tool will flash the firmware on your Android Device.

eMMC DL Tool

14: Once Flashing is completed, you will be able to see Green Pass Status.

eMMC DL Tool

15: Now, close eMMC DL Tool and disconnect your Android Device from the computer.

Congratulations, Now your Android Device is successfully running the Stock ROM you have Downloaded.

 

Flash Android Stock Firmware (Official Rom) video

https://youtu.be/nnn2

Readme Once:

[*] You can follow the above tutorial to flash all types of Qualcomm Firmwares.

[*] Take Backup: Take a Phone backup before using the eMMC DL Tool as because during the flashing process your personal data will be removed.

[*] Credits: eMMC DL Tool is created and distributed by Foneric, Inc. So full credit goes to them for sharing the tool for free.

Download & Flash Android Stock Firmware (Official Rom)

Leave A Reply

Your email address will not be published.