How to Flash stock rom using LiveSuit Application


Download & Flash Android Stock Firmware (Official Rom)

These are the instructions to Flash Stock Rom on Android using LiveSuit Application.

Requirements: Your Android should have atleast 20-30 percent of battery to perform the Flashing Process.

Download Android Stock Firmware (Official Rom)


The firmware shared on this page is officially released by the company and helps you to recover your Android device if you ever got bootloop, software error, update error, hanging and dead issue.

Flash stock rom using LiveSuit Application

Step 1: Download and install Android ADB Drivers on your computer.

Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files:

Step 3: Now LiveSuit.exe from the extracted files.

Open LiveSuit.exe

Step 4: Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.

Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.

Step 6: Now, Unplug all the connected Android from the computer (if you have already connected), then Click on Yes button to Continue.

Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware.

Step 8: Now, Dont Click on Finish Button.


Step 9: Now, It is the right time to connect your Android to the Computer using USB Cable. Before Connecting the Android, make sure its Power Off.

Firstly Connect the USB Cable to the Computer then on your Android Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your Android.

Step 10: Once your Android is successfully recognized by your computer, you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to Continue.

Step 11: On the next Windows, again click on Yes Button to continue.

Step 12: Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it.

Step 14: Now, close LiveSuit Application by clicking on the Exit Button.

Step 15: Disconnect your Android from the Computer and Restart it.

Congratulations, You have successfully flashed the Stock ROM using LiveSuit Application.

Readme Once:

[*] The above tutorial only works with the firmware that comes with the support to LiveSuit Application.

[*] Take Backup: Take a Phone backup before using the LiveSuit as because during the flashing process your personal data will be removed.

[*] Alternative Tool: PhoenixSuit is the best alternative to the LiveSuit Tool. You can Download PhoenixSuit or read How to use Phoenixsuit.

1 Comment
  1. […] [*] How to use Live Suit: If in case you want to learn how to operate LiveSuit to flash firmware, then head over to the How to Flash stock rom using LiveSuit Application Page. […]

Leave A Reply

Your email address will not be published.