How to Download and Flash Innjoo Max 3 3G Stock Rom (flash file)
These are the instructions to How to Download and Flash Innjoo Max 3 3G Stock Rom (flash file) using Smart Phone Flash Tool (SP Flash Tool) on Windows Computer.
Do you want to change the stock ROM of Innjoo Max 3 3G Device or your stock ROM has got corrupted ? Then in this tutorial we’ll guide you to the process of using the SP Flash Tool (Smart Phone Flash Tool) to install the custom ROM on your Innjoo Max 3 3G device.
Requirements: Your Innjoo Max 3 3G must have atleast 40-50% of battery and USB Drivers
Download Innjoo Max 3 3G Stock Firmware (Original flash file) 2018
File Name: InnJoo_Max_3_3G_MT6580_20170617_5.1.zip
File Size: 886 MB
The firmware shared on this page is officially released by the company and helps you to recovery your Innjoo Max 3 3G device if you ever got bootloop, software error, update error, hanging and dead issue.
Caution: Your personal data will be deleted after flashing the stock firmware through Smart Phone Flash Tool (SP Flash Tool), So take a backup of everything before following the tutorial below.
How to Flash Innjoo Max 3 3G using Smart Phone Flash Tool (SP Flash Tool)
STEP 1: Download and Install the Innjoo USB Driver 2017 on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Innjoo Max 3 3G and Remove the battery in case it is removable.
STEP 3: After downloading, extract the zip file on you system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory.
STEP 8: Now click the Download button to start the downloading process.
STEP 9: After completed all the above steps, connect yourInnjoo Max 3 3G to your system using the USB cable and , press any button other than power button so that your system will detect your Innjoo Max 3 3G device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Innjoo Max 3 3G device and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Innjoo Max 3 3G
Keep in mind
1. The above tutorial only works with the Stock firmware or Custom Rom which comes with the Scatter file in it (basically mediatek devices).
2. Backup Please: Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed permanently.
3. How to Flash IMEI: After flashing the firmware on your Mediatek Device, maybe you need to follow How to Flash IMEI using SN Write Tool to fix the IMEI on your Innjoo Max 3 3G device.