In this tutorial, we will show you how to download MTK Flash Tool and use it flash firmware on your Android device. Many of the Android users turn to flashing firmware on their devices manually. There can be a number of reasons behind this. One of the most common reasons for this that OEMs usually roll out OTA update for their devices in batches, so this means that some devices have to wait for a long time until they finally receive the OTA update. But if you try to update your device’s firmware manually, you just need to get hold of the update package and then update your device instantly.
In addition to that, manually flashing firmware also helps to bring your bricked devices back to working condition. When you flash or install custom binaries on your device or carry out any other tweaks on your device, then there is always a chance of things going downhill, meaning that you could end up with a bricked or a boot looped device. But as we mentioned, the MTK Flash tool can solve this problem. This shows that manual flashing has many benefits, so flashing firmware using MTK Flash tool is an absolute priority. So without any more delay, let’s get into it.
What is MTK Flash Tool
The MTK Flash Tool is also known as the MediaTek flash tool. This tool brings in a lot of handful features and functionalities. Below, we have mentioned some of the highlighted functionalities of the tool:
- Flash Firmware: Using the MTK Flash tool, you can easily flash firmware files onto your MediaTek devices. You just need to get hold of the firmware package, after that upload the file and then click on the download button to complete your task.
- Support Various Firmware Formats: Also, this tool also comes with compatibility for the .CFG file format along with support for .TXT files that we can find inside the MediaTek firmware packages.
- Portable App: This tool is also portable in nature, this means that you will not have to install the tool. You just need to extract the tool on your PC and start running it directly.
These mentioned features were some of the highlights that we get to see with the MTK Flash Tool. Now it is time to discuss the procedure of the installation of firmware using the MTK Flash tool.
Download MTK Flash Tool | How to Flash Firmware Using It
Before we head into the procedure to install firmware using the tool, let us take a look at some of the files that you have to download before starting the process. So from the section below, download the files and after they are downloaded, proceed with the instructions:
Prerequisites
- First, download and install the MediaTek VCom Drivers on your PC.
- After that, download the MTK Flash tool file on your computer from the link provided: MTK Flash Tool.
- Similarly, download the stock firmware that you want to download on your {{MediaTek}} device.
Instructions
STEP 1: First of all, you have to extract the MTK flash tool that you downloaded to any convenient directory in your computer.
STEP 2: After that, proceed to this folder that you extracted and then launch the tool by double clicking on the Flash_Tool.exe.
STEP 3: After the tool has been opened, click on the Scatter File / Configure button as shown in the image.
STEP 4: Once done, search for the .CFG file or the .TXT file from the stock firmware package that you downloaded for your device, select the file and then click on OK.
STEP 5: Once you are through with the above steps, power off your device and then connect it to your PC with the help of a USB cable.
STEP 6: After that, click on the download button that you see in the tool. With this, the flashing process will be initiated.
STEP 7: You will know that the flashing process has been completed when you see the green circle icon.
STEP 8: Finally, you can remove your device from the PC and then close the MTK Flash tool.
So that was it from our side on how to flash firmware on your MediaTek device using the MTK Flash tool. We hope that you found this guide helpful. Let us know what you think in the comment section below.
